江蘇華譽自動化設備制造有限公司是一家維修各類進口閥門的專業性公司，同時公司也是美國Topscontrol中國區的一級代理商，銷售減溫減壓裝置、汽機旁路以及各類惡劣工況下的調節閥等產品。公司擁有專業化的技術團隊和管理團隊，產品被廣泛應用于石油、化工、造紙、制藥、電力、冶金等領域；我們始終堅持 “以科技為本” 的精神，力爭為新老用戶提供優質的產品及售前咨詢和售后服務。
產品詳情
Topscontrol Cavitrol
Topscontrol CAV III Trim
Topscontrol Cavitrol III trim is designed for clean, cavitating services with pressure drops of up to 207 bar (3000 psi). The cage in this trim contains a multitude of specially-shaped, radially-aligned holes that reduce fluid turbulence and stage the overall pressure drop, both of which control or eliminate the damaging effects of cavitation.
Topscontrol CAV III Micro-Flat Trim
Topscontrol CAV III Micro-Flat trim is designed for clean, cavitating services with pressure drops of up to 241 bar (3500 psi) and very low flow rates. This is a combination of two distinct products; combining the cavitation control of Cavitrol III trim with the low flow rate capability of Micro-Flat trim.
Topscontrol CAV4 Trim
Topscontrol CAV4 valves are designed for clean, cavitating services where the pressure drop is above 207 bar (3000 psi). The Cavitrol? IV trim in this valve is designed to have an expanding flow area. Each of the trim stages has a successively larger flow area. The result is a very efficient operation because more than 90 percent of the overall pressure drop is taken in the initial stages, where there is little danger of cavity formation which could result in cavitation.
- Previous:Chapter 1
- Next:Tops-Cavitation Trim
